The PSoC® 6 Wi-Fi BT Prototyping Kit (CY8CPROTO-062-4343W) is a low-cost hardware platform that enables design and debug of PSoC 62 MCUs and the Murata LBEE5KL1DX Module (CYW4343W WiFi + Bluetooth combo chip).
The PSoC® 64 Secure Boot Wi-Fi BT Pioneer Kit (CY8CKIT-064B0S2-4343W) is a low-cost hardware platform that enables design and debug of the PSoC 64 Secure Boot MCU and the Murata Type 1DX Module (CYW4343W Wi-Fi + Bluetooth Combo Chip).
Embedded Planet's Agora Product Development Kit is a multi-connectivity, multi-sensor IoT endpoint and development adapter that enables the prototyping of Cellular, Bluetooth, and LoRaWAN designs. The kit includes a fully populated Agora and a Flidor development adapter.
Seeed Wio LTE M1/NB1(BG96) is a complete board that enables quick prototyping of a variety of applications for the cellular Internet of Things.
Wio 3G is a complete board that enables quick prototyping of a variety of applications for the cellular Internet of Things.
The Arch Max is an mbed enabled development board for rapid prototyping. It's based on a STM32F407VET6 microcontrolle with an ARM Cortex-M4F core running at 168MHz. It includes an open link to provide SWD debug, drag-n-drop programming and USB serial communication.
Low-power, high-performance, Ethernet board enabling direct firmware update
enebular Reference Board “RAVEN”
The u-blox C030-U201 2G/3G mbed-enabled Internet of Things (IoT) Starter Kit is a versatile development platform that allows quick prototyping of a variety of applications for low-power Internet of Things (IoT).
The EVK‑ODIN‑W2 is designed for use with Arm® Mbed™ and is a complete starter kit that allows quick prototyping of a variety of applications for Internet of Things. The support for dual‑band Wi‑Fi, Bluetooth Low Energy, and Ethernet enables easy connectivity for a wide range of applications. Additional hardware interfaces such as CAN, SPI, I2C, UART, ADC, and GPIOs are available using Arm Mbed. The EVK‑ODIN‑W2 can also be used to evaluate the pre‑loaded u‑blox software suite using the u-blox s‑center tool on a PC.
The u-blox C030-R412M LTE Cat-M1/NB1/2G mbed-enabled Internet of Things (IoT) Starter Kit is a versatile development platform that allows quick prototyping of a variety of applications for low-power Internet of Things (IoT).
The OM13098: LPCXpresso54628 Development Board is comprised of target LPC54628 device, with a complete set of peripheral interfaces to enable developers to fully explore the capabilities of LPC546xx devices.